×

Article was already bookmarked.

OS-level optimizations


*This article is meant to improve the performance of Packet Sensors and Packet Filters. It is not intended for Flow Sensors or Flow Filters.

  1. Download the latest ixgbe driver. Intel latest driver was responsible for a decrease in CPU usage. With Ubuntu 12.04 kernel version, the CPU usage was 80% and it is only 45% with the latest Intel driver.
  2. Load PF_RING in transparent mode 2 and set a reasonable buffer size.
    modprobe pf_ring transparent_mode=2 min_num_slots=16384
  3. Load ixgbe driver. We found that setting the InterruptThrottleRate to 4000 was optimal for our traffic. Setting the FdirPballoc to 3 enabled 32k hash filters or 8k perfect filters in Flow Director.
    modprobe ixgbe InterruptThrottleRate=4000 FdirPballoc=3 
  4. Bring up the 1 or 10gbe interface (in our case this was eth3).
    ifconfig eth3 up
  5. Optimise the Ethernet device. We mostly turned off options which hinder throughput. Substitute eth3 with the interface appropriate to your instance.
    ethtool -C eth3 rx-usecs 1000
    ethtool -C eth3 adaptive-rx off
    ethtool -K eth3 tso off
    ethtool -K eth3 gro off
    ethtool -K eth3 lro off
    ethtool -K eth3 gso off
    ethtool -K eth3 rx off
    ethtool -K eth3 tx off
    ethtool -K eth3 sg off
    
  6. Set up CPU affinity for interrupts based on the number of RX queues on the NIC, balanced across both processors. This may vary from system to system. Check /proc/cpuinfo to see which processor IDs are associated with each physical CPU.
    printf "%s" 1 > /proc/irq/73/smp_affinity #cpu0 node0
    printf "%s" 2 > /proc/irq/74/smp_affinity #cpu1 node0
    printf "%s" 4 > /proc/irq/75/smp_affinity #cpu2 node0
    printf "%s" 8 > /proc/irq/76/smp_affinity #cpu3 node0
    printf "%s" 10 > /proc/irq/77/smp_affinity #cpu4 node0
    printf "%s" 20 > /proc/irq/78/smp_affinity #cpu5 node0
    printf "%s" 40 > /proc/irq/79/smp_affinity #cpu6 node1
    printf "%s" 80 > /proc/irq/80/smp_affinity #cpu7 node1
    printf "%s" 100 > /proc/irq/81/smp_affinity #cpu8 node1
    printf "%s" 200 > /proc/irq/82/smp_affinity #cpu9 node1
    printf "%s" 400 > /proc/irq/83/smp_affinity #cpu10 node1
    printf "%s" 800 > /proc/irq/84/smp_affinity #cpu11 node1
    printf "%s" 1000 > /proc/irq/85/smp_affinity #cpu12 node0
    printf "%s" 2000 > /proc/irq/86/smp_affinity #cpu13 node0
    printf "%s" 40000 > /proc/irq/78/smp_affinity #cpu18 node1
    printf "%s" 80000 > /proc/irq/88/smp_affinity #cpu19 node1
    
    Or you can also use the ./set_irq_affinity.sh script from the driver
    ./set_irq_affinity.sh
    
  7. We recommend that several network buffer sizes be increased from their defaults. Please add the following lines to /etc/sysctl.conf:
    net.core.rmem_max = 16777216
    net.core.wmem_max = 16777216
    net.ipv4.tcp_rmem = 4096 87380 16777216
    net.ipv4.tcp_wmem = 4096 65536 16777216
    net.core.netdev_max_backlog = 250000
    
    For RHEL6 you may also want to add the following to /etc/sysctl.conf:
    net.ipv4.tcp_congestion_control = bic'



Author
Andrisoft Team
Date Created
2014-06-24 20:59:32
Date Updated
2017-12-10 01:42:28
Views
14396