×

Article was already bookmarked.

Upgrade to 8.0 (step by step tutorial)


To upgrade Wanguard and Wansight from version 6.3 or 7.x to 8.x, please follow the steps listed below, in the presented order:

  1. Login in to the web interface, go to Configuration » Components and stop all components
  2. Logout from the web interface by selecting your user menu from the top-right part of the window
  3. Stop the WANsupervisor service on all servers:
    service WANsupervisor stop
    
  4. If you are using PF_RING as a Capture Engine, update to PF_RING 7.6
  5. If you are using Netmap as a Capture Engine, update it to the latest git version
  6. If you are using DPDK as a Capture Engine, update it to version 19.11
  7. Upgrade the software packages starting with the Console server. The Linux distribution should not be upgraded at this point (e.g. Ubuntu 18 to 20).
    On Red Hat/CentOS servers upgrade the packages with:
    yum --disablerepo="*" --enablerepo="Andrisoft" upgrade
    On Debian/Ubuntu servers, upgrade the packages with:
    apt-get update; apt-get dist-upgrade
    Make sure the software is upgraded on all servers, not just on the Console server. It is very important to run the same software version everywhere.
  8. Start the WANsupervisor service on all servers:
    service WANsupervisor start
  9. Clear up your browser's cache
  10. Log in to the web interface and start the components from Configuration » Components
  11. Review the release notes for version 8.0


Your feedback is highly appreciated! Please contact support andrisoft.com if you encounter errors.



Author
Andrisoft Team
Date Created
2020-07-02 01:16:08
Date Updated
2020-08-31 19:53:25
Views
496